LogoLogo
Back to binalyze.com
  • Welcome | Binalyze Knowledge Base
  • AIR
    • AIR
    • Introduction
      • What is AIR?
      • Terminology
      • Architecture
        • AIR Responder Architecture; overview and performance analysis
        • AIR Task Flow and Management
      • Network Communication
      • Cloud Forensics with Binalyze AIR
    • AIR Setup
      • Console Hardware Requirements
      • Console Pre-Installation
      • Console Installation
      • Microsoft Azure Cloud Platform Integration
      • AIR Relay Server
        • What is AIR Relay Server?
        • Requirements for installation
        • How to install a Relay Server on different Linux platforms
        • How to change IP address of Relay Server
        • How to install a Responder with Relay Server support
        • Proxy configurations
          • Adding proxy to Relay Server
          • Adding proxy to Responder
        • Service Management for Relay Server
        • Whitelisting for Relay Server
        • Retrieving metrics from Relay Server
        • Updating and Uninstalling Relay Server
        • Troubleshooting
      • AIR Responder - Supported Operating Systems
        • AIR Responder - MS Windows supported systems
        • AIR Responder - Apple macOS supported systems
        • AIR Responder - Linux (DEB/RPM) supported systems
        • AIR - ESXi Standalone Collector
        • AIR Responder - Chrome supported systems
          • AIR For Chrome
      • AIR Responder Hardware Requirements
      • AIR Responder Deployment
        • Golden Image
        • Responder & Active Directory OUs
        • AIR Responder Exception Rules
          • Binalyze AIR Watchdog Folder
        • FDA via Jamf and Apple’s PPPC utility
        • AIR Responder in Windows 'Safe Mode'
      • Uninstalling AIR Responders
      • Security
        • AIR Console Access Control
        • AIR SSL Enforcement
          • SSL Certificate Management in Binalyze AIR
        • Two-factor authentication (2FA)
      • Post-Deployment Configuration Guide
        • Using AIR CLI on Binalyze AIR Console
      • AIR's User Settings
    • Updating AIR
      • Single-Tier Systems
      • 2-Tier Systems
      • AIR Console Updating - SaaS
    • Backup
      • Restore AIR Backup using the CLI
    • Features
      • Acquisition
        • Task Creation
          • Regex in AIR/DRONE:
          • Asset Management with Persistent Saved Filters
          • Task Cancellation and Deletion
        • Acquisition Profiles
        • Supported Evidence
          • Windows Collections
          • macOS Collections
          • Linux Collections
          • IBM AIX Collections
        • Scheduling Tasks
        • Disk and Volume Imaging
          • Imaging with interACT
        • Chain Of Custody in AIR
      • Auto Tagging
      • Triage
        • Triage Rule Templates
          • YARA Templates
          • Sigma Templates
          • osquery Templates
        • Schedule Triage Tasks
      • interACT
        • interACT Commands
        • PowerShell commands in interACT
      • Compare
      • Timeline
      • Integrations
        • SSO Integrations
          • Microsoft Azure SSO Integration
          • Okta SAML 2.0 SSO Integration
        • Webhooks
          • Mattermost Integration
          • Splunk Integration
          • IBM QRadar Integration
          • Wazuh Integration
          • Cortex XSOAR Integration
          • Elasticsearch Logstash Kibana Integration
          • ServiceNow Integration
          • Sumo Logic Integration
          • Crowdstrike Integration
          • Microsoft Sentinel Integration
          • Slack Integration
          • Carbon Black Cloud Integration
          • Rapid7 InsightIDR Integration
          • LogicHub SOAR (DEVO) Integration
          • Fortigate SIEM Integration
          • Dynatrace Integration
          • Stellar XDR Integration
          • SentinelOne Integration
          • Microsoft 365 Defender Integration
          • Cisco XDR Integration
      • Event Subscription
      • AIR API
        • API in AIR is likely to be more effective than Webhooks
      • DRONE
        • What is DRONE?
        • What is an Analysis Pipeline?
        • Analyzers
          • Cross Platform Analyzers
            • MITRE ATT&CK Analyzer
              • MITRE ATT&CK Analyzer changelog
            • Dynamo Analyzer
            • Browser History Analyzer
            • Generic WebShell Analyzer
          • Windows Analyzers
            • Windows Event Records and how AIR handles them
              • Windows Event Logs in AIR v4.21 and older versions
              • Event Records Summary vs. Event Records
            • Prefetch Analyzer
            • Shellbag Data Fields
          • Linux Analyzers
          • macOS Analyzers
            • Audit Event Analyzer
      • AIR Investigation Hub
        • Using the AIR Investigation Hub
        • Investigation Hub – Data Usage Statistics Dashboard
      • AIR File Explorer
        • File Explorer - FAQs
      • Tornado (Preview Version)
        • Tornado Installation Guide
          • Tornado Operating System Support
        • Updating Tornado
        • Tornado demo video
        • Getting Started with Tornado
          • Tornado Terminology
        • Tornado Collectors
          • Accessing Google Workspace
            • Service Account Creation
              • Enable Service Account Key Creation
          • Access Modes in O365
            • O365 license types
        • Tornado Troubleshooting & Feedback
        • Tornado FAQs
      • Frank.AI
      • Asset Isolation
      • Evidence Repositories
      • Policies
      • Tags
      • Off-Network Responder
        • Setting Up a Custom Case Directory
        • biunzip
          • biunzip password file
      • Binalyze AIR Responder Proxy Support
      • Proxy Configuration on Binalyze AIR Console
      • Binalyze AIR Audit Logs
    • Troubleshooting
      • Binalyze AIR Console CPU Profiling for Performance Issues
      • Understanding MSI Error Code 1618
      • How to gather Binalyze AIR logs for Troubleshooting
        • Collecting Binalyze AIR Console Log Files
        • Collecting Binalyze AIR Responder Log Files
        • Collecting Binalyze AIR Off-Network Responder Log Files
    • FAQs
      • Binalyze AIR Console Migration Procedure For Single-Tier Setup
      • Binalyze AIR Console Migration Procedure For 2-Tier Installation
      • Binalyze AIR Console Backup Procedure
      • Resolving the “Invalid Host Header. Host must be the Console Address” Error
      • How to download the collected evidence and artifacts in Binalyze AIR?
      • How to gather Binalyze AIR logs for Troubleshooting
        • Collecting Binalyze AIR Console Log Files
        • Collecting Binalyze AIR Responder Log Files
        • Collecting Binalyze AIR Off-Network Responder Log Files
      • AIR responder troubleshooting
      • Understanding Port Usage in Binalyze AIR
      • How many assets can connect to a single Console instance?
      • How do I enable SSL on AIR?
      • Can I use AIR with EDR/XDR Products?
      • Can I integrate AIR with my SOAR/SIEM?
      • What (sub)domains are used by AIR?
      • Docker & Host System IP Conflict
      • Monitoring Responder and UI API's
      • How do I update AIR Console?
      • How do I update AIR Responders on assets?
      • How to reset the password of a user via the AIR-CLI?
      • Is there a way to move an asset from one Organization or Case to another?
      • Creating exclusions/exception rules for Binalyze AIR Responder on EPP and EDR Solutions
      • Anything missing?
      • How can I install a version of AIR that isn't the latest?
  • General
    • Licenses - Open-source Software List
Powered by GitBook
On this page
  • Before you start
  • Single-Tier Systems With Internet Access
  • Single-Tier Systems Without Internet Access
  • Post-migration Tasks
  • Check that the Migration is Completed Successfully

Was this helpful?

Export as PDF
  1. AIR
  2. FAQs

Binalyze AIR Console Migration Procedure For Single-Tier Setup

PreviousFAQsNextBinalyze AIR Console Migration Procedure For 2-Tier Installation

Last updated 1 year ago

Was this helpful?

Before you start

To activate the Consolidated Report feature, it is necessary first to update the Docker before starting to update the Binalyze AIR Console. It will be sufficient to run the script we have prepared for the Docker update and the necessary changes to be made in the docker-compose.yml file. (Details are specified below)

If you have a Custom Network or Syslog configuration, or Offline License Server, it should be added manually to the docker-compose.yml file afterwards.

Single-Tier Systems With Internet Access

In order to run the migration script successfully, the Binalyze AIR Console machine must be able to access address.

  1. Use a terminal emulator, such as PuTTY to connect to the CLI of the Binalyze AIR Console Server via SSH.

  2. Navigate to the AIR folder (/opt/binalyze-air by default) by executing the following command:

cd /opt/binalyze-air

3. Stop containers by executing the following command:

docker-compose down

4. Run the following command to download and execute the migration script:

curl -fsSL https://cdn.binalyze.com/air-deploy/migration-scripts/online-app-migration.sh | sudo bash -s

5. Run the following command to validate the docker-compose.yml file

docker-compose config

6. Run docker ps command to check if the data-master and other containers are in a healthy state. The output should be as follows:

Single-Tier Systems Without Internet Access

  1. Download the offline installation package to your computer from the links below:

Ubuntu 18.04 → 22.04

CentOS 7 / RHEL 7

CentOS 8 / RHEL 8

2. Use a terminal emulator, such as PuTTY to connect to the CLI of the Binalyze AIR Console Server via SSH.

3. Upload the offline installation package to the Binalyze AIR Console server.

4. Navigate to the directory where the installation package was uploaded.

5. Extract the contents of the offline installation package and navigate to the directory by executing the following command:

tar zxf binalyze-air-setup-ubuntu.tgz cd binalyze-air-setup cd migration-scripts

6. Start the migration process by executing the following command:

sudo -E bash ./offline-app-migration.sh

Post-migration Tasks

Check that the Migration is Completed Successfully

You can check whether the migration process is successful by using the actions below:

  1. Go to https://<AIR_ADDRESS>/api/app/info

  2. Check the consoleVersion and posgresEnabled values of the output. It should be:

    • "consoleVersion":"3.5.1 or 3.6.x"

    • "postgresEnabled":true

Check health state

Have you encountered any issues? Contact our Support team at

https://support.binalyze.com
https://cdn.binalyze.com/air-deploy/offline/latest/binalyze-air-setup-ubuntu.tgz
https://cdn.binalyze.com/air-deploy/offline/latest/binalyze-air-setup-centos7.tgz
https://cdn.binalyze.com/air-deploy/offline/latest/binalyze-air-setup-centos8.tgz
get.docker.com
Before you start
Single-Tier Systems With Internet Access
Single-Tier Systems Without Internet Access
Post-migration Tasks
Check that the Migration is Completed Successfully
:warning:
:warning: